And this is why we don’t have nice things …
.
Original post by: CrossFit Everett
Maybe you didn’t know that the 10# and 15# plates are NOT designed to be dropped? When you dump a set of 10# or 15# plates on a bar from the overhead or shoulder position, you are shortening the life of some very expensive equipment. The 10# and 15# plates simply can’t take the beating of repeated drops from above ground. See below …
.
.
You know, there’s a gym budget for buying cool things, adding rowers, GHDs, racks, upgrading equipment and replacing things that actually wear out.
This picture represents over a $600 expenditure for 10# & 15# plates that were not worn out but abused and misused.
It’s $600 that could have gone to a GHD or a new rower … but nope, we have to replace plates that should have lasted a number of years.
.
There is NO reason that our very expensive 10# & 15# Rogue plates should look like this.
This peeps, is the reason we don’t have more equipment …
A lot of people think that when you lift weights it means that you should slam them onto the floor when done. This is bad for a number of reasons.
- One reason is obvious… it could break the equipment and/or damage the floor.
- The second reason is that you could really hurt yourself if you don’t practice setting weights down in a controlled and easy fashion.
Check out this article by Greg Everett who is a lifting coach, bar none, on good practices for lowering the bar SAFELY!
.
Remember to have a plan for bailing if you get in trouble.
Ask your coach for suggestions if you are unsure about how to lower weight safely in a particular exercise.
.
And as a reminder about proper care of our equipment, please do not drop the following:
1. Empty bars
2. Bars loaded with only 15# or 10# plates exclusively
3. Kettlebells
4. Bars loaded with iron plates exclusively
2. Bars loaded with only 15# or 10# plates exclusively
3. Kettlebells
4. Bars loaded with iron plates exclusively
